
DST SEIBU GIKEN – NEM ALMA CİHAZLARI
There is moisture everywhere. Damp air in the wrong place can damage products and buildings or reduce the efficiency of a production process. Dehumidifiers from Seibu Giken DST AB are your best means of avoiding such harmful moisture.
There is a Seibu Giken DST dehumidifier for all applications from small portable units to large dehumidifiers, for e.g. the process industry. All of DST’s units use the unique SSCR rotor from Seibu Giken, Japan. A guarantee of high dehumidification capacity! Thanks to our research and development efforts, the SSCR rotor has been at the leading edge of sorption technology for many years. The quality of the rotor is crucial for a dehumidifier.
Desiccant Rotor
Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency.
 Dehumidifiers for every demand from smallest ones to industrial ranges.
Application Areas:
·
· Pharmaceutical Production Facilities
· Low Humidity Storages
İron, steel and other metals, electrical equipments, grain, corn, coffee, sugar storage
· Military Facilities
Ship, Plane and tank hangars
· Food and Confectionary Production
Cheese, fish, bread, confectionary and cookie production
· Museums
· Power Stations
· Pump Stations

Small dehumidifiers
Stainless steel units. These dehumidifiers are used for purproses such as dehumidification in storages, pump stations, laboratories, hydropower plants and for water damage restoration.
Aquasorb - basically functions as a Consorb but the wet air fl ow is condensed in an air-chilled condenser instead of being led out. Thanks to the common fan for dry air and cool air, all energy is accumulated in the dry air. Aquasorb has a high dry airfl ow, which improves the drying effect.
Consorb - principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air.
Recusorb DR - Like recusorb R has heat recycling, but has a fan for both the dry airfl ow and the wet airfl ow. This makes installation simpler when you require overpressure in the room to be dehumidifi ed. This principle is also suitable when you want to achieve very low dew points.
Mid-Range Dehumidifiers
Recusorb R - operates using integrated heat recycling. During the rotor’s regeneration (green), heat is absorbed, and then recycled in the “purge zone”, where incoming air is preheated and partly dehumidifi ed. Energy consumption falls and the dry air becomes both drier and cooler compared to other sorption dehumidifiers.
R-060 and R-061R are stainless steel units used in fields such as process industry, museum, archives, warehouses, or in the event of serious water damage.
RZ Series consist of four compact units made of galvanized steel with fans on the outside. Ideal for the process industry, for example. Available with pre and cooler.
Flexisorb – Dehumidifiers for Industrial Applications
Flexisorb uses the Recusorb, Consorb, Econosorb or Frigosorb dehumidification principles.
Flexisorb means flexibility. The Flexisorb range has been developed by DST to satisfy the varying requirements of industry. Flexisorb units are modular in their design, and have tremendous potential to be adapted according to the specific requirements of each application.
Frigosorb, DST patentli bir cihazdır. Frigosorb, nemli hava akışının ayrılmasının
zor olduğu durumlarda kullanılır. ısı pompası fonksiyonu sayesinde, normal nem alma cihazlarının toplam enerji tüketiminin 1/3 ü oranındaki enerji tüketimi ile enerji verimi yüksektir.
Frigosorb is a principle patented by DST. Frigosorb is used in applications where it is difficult to remove a wet air airflow. Thanks to the heat pump function Frigosorb is very energy-efficient, using approx. 1/3 of the total energy consumption of regular sorption dehumidifiers.
Aquasorb basically functions as a Consorb but the wet air fl ow is condensed in an air-chilled condenser instead of being led out. Thanks to the common fan for dry air and cool air, all energy is accumulated in the dry air. Aquasorb has a high dry airflow, which improves the drying effect.

Rotor Cassettes
Choose between four different rotor from Seibu Giken, all with unique qualities.
· SSCR-U-rotor for standard applications
· SSCR-H-a bacteriocidal silica gel rotor
· SSCR-CI-100% silicon free
· SZCR-zeolite rotor for very low dew points
Kontrol Ekipmanları
A good control system for dehumidification installations will usually have a very short payback period. DST offers a number of tried and tested controls to meet the needs of various applications with regard to energy-saving, climate control and monitoring. See DST’s Energy Saving brochure for further information.
|